Diazo emulsion for Plastisol and water-based inks. Ideal for use with phthalate-compatible ink systems.
Mix the sensitiser according to the instructions on the bottle. Pour the solution into the emulsion and mix thoroughly. Leave the emulsion for 2 hours to release air bubbles.
Diazo emulsion for Plastisol and water-based inks. Ideal for use with phthalate-compatible ink systems.
Mix the sensitiser according to the instructions on the bottle. Pour the solution into the emulsion and mix thoroughly. Leave the emulsion for 2 hours to release air bubbles.
Najniższa cena w ciągu ostatnich 30 dni
Physical properties:
- Blue colour, also available in transparent.
- Extremely durable for long print runs.
- 41% solid content.
- Higher solvent resistance than aerosol spray screen.
Handling:
Handle under safe light conditions.
Screen preparation:
Before applying the emulsion, it is important that the screen is clean.
Application procedure:
Use a clean application spout that has a smooth edge, free from scratches or burrs. The application environment should be in a clean, well-lit and safe area with 65% humidity.
Apply one or two layers of emulsion to the print side.
Flip the screen over and apply one or two layers to the flare side.
Additional layers may be used to achieve a user-specified result.
Drying:
Dry the screen horizontally with the print facing downwards in a clean, dry room. Follow the guidelines below to ensure complete drying:
30°C to 40°C
30% to 50% relative humidity
Good air circulation
Exposure:
For best results, use an exposure calculator to determine the exact exposure time. Correct exposure depends on a number of factors, such as clean film positives, screen colour, emulsion type, emulsion thickness and type of exposure device.
Approximate exposure times
Screen colour Seconds
34 White 75-110
43 White 55-75
77 Yellow 40-60
120 Yellow 25-45
140 Yellow 22-40
Metal halide lamp 8K 5K
Note: The above times are based on the use of a 2/2 coated screen.
Cleaning:
Gently spray both sides of the screen with water. Wait a moment for the emulsion to soften. Place the print side under the water spray until the image is fully visible. Rinse both sides thoroughly and dry.
Recovery:
Removing the emulsion is straightforward. This can be done with a concentrated remover or powder.
12.370 removal powder.
12.380 concentrated remover.
Storage:
Store the emulsion in a cool, dry place. Unused emulsion has a shelf life of one year when stored properly. Coated screens will retain quality for approximately 30 days if stored properly.
15°C to 25°C
40% to 60% humidity.
Specific References
Polski