Polski
EMULSIONS 110 is a one-part emulsion that does not require the addition of diazo. Use straight from the container.
A photopolymer emulsion for Plastisol and water-based paints.
11.110 PHOTOPOLYMER EMULSION
11.110
1 Items
EMULSIONS 110 is a one-part emulsion that does not require the addition of diazo. Use straight from the container.
A photopolymer emulsion for Plastisol and water-based paints.
144,49 PLN Netto
PLN177.72
VAT included
Najniższa cena w ciągu ostatnich 30 dni
Cena całkowita(netto): 144,49 PLN
Cena całkowita(brutto): PLN177.72
Cena całkowita(brutto): PLN177.72
Physical properties:
- Purple colour, also available in a transparent version.
- Almost no bubbles or scratches.
- Good resolution and edge sharpness.
- Extremely durable for long runs.
- 38% solid content.
Handling:
Handle under safety light conditions.
Screen preparation:
Before applying the emulsion, it is important that the screen is clean. To achieve this, use our degreasing agent 12.320.
Application procedure:
Use a clean trough with a smooth edge without scratches or burrs. The application environment should be clean and illuminated with a safe light and 65% humidity.
Apply one or two layers of emulsion to the print side.
Flip the screen over and apply one or two coats to the flare side.
Additional layers may be used to achieve a user-specified result.
Drying:
Dry the screen in a horizontal position with the print facing downwards in a dry, clean room. Follow the guidelines below to ensure complete drying:
30°C to 40°C
30% to 50% relative humidity
Good air circulation
Exposure:
For best results, use an exposure calculator to determine the exact exposure time. Correct exposure depends on many factors, such as clean film positives, screen colour, emulsion type, emulsion thickness and type of exposure device.
Approximate exposure times:
Screen colour Seconds
34 White 15-25
43 White 12-20
77 Yellow 12-20
120 Yellow 10-18
140 Yellow 8-15
Metal halide lamp 8K 5K
Note: The above times are based on the use of a 2/2 coated screen.
Cleaning:
Gently spray both sides of the screen with water. Wait a moment for the emulsion to soften. Place the print side under the water spray until the image is fully visible. Rinse both sides thoroughly and dry.
Recovery:
Removing the emulsion is straightforward. This can be done with a concentrated remover or powder.
12.370 removal powder.
12.380 concentrated remover.
Storage:
Store the emulsion in a cool, dry place. Unused emulsion has a shelf life of one year when stored properly. Coated screens will retain quality for up to 30 days if stored properly.
15°C to 25°C
40% to 60% humidity**.
11.110
1 Items
Specific References