Polski
UV and UV-LED curing lacquer for printing on glass and plastic bottles.
SERIES 95.000 UV Plastic - OLEFINCURE CMYK 5kg
95.000
3 Items
UV and UV-LED curing lacquer for printing on glass and plastic bottles.
892,08 PLN Netto
PLN1,097.26
VAT included
Najniższa cena w ciągu ostatnich 30 dni
Cena całkowita(netto): 892,08 PLN
Cena całkowita(brutto): PLN1,097.26
Cena całkowita(brutto): PLN1,097.26
FIELD OF APPLICATION:
Varnish designed for printing on glass and plastic bottles used for packaging cosmetics, household chemicals and other similar applications.
PRINTING PROCESS:
Mesh
- 140 - 165 incl/cm
Emulsion:
- 11.170 Photopolymer
- 11.701 Diazo
Curing:
- In tunnel: UV lamp over 60 W/cm Tape speed 15-20 m/min Minimum 120mJ/cm2
Thinner:
- 1-10% 80.008
- 1-10% 80.005 - for white lacquer
- Max 5% 80.007 - increases flexibility of varnish
Additives:
- Max 5% 80.013 - improves thixotropic properties of paint
- 29.140 Hardener
Cleaning:
- Screen Cleaner 52.001
Storage:
If 95 series products are stored in their original packaging, 10-25°C at 30-70% humidity, they have a minimum life of 1 year
GENERAL CHARACTERISTICS:
- Fast curing
- Low odour
- Good stability on sieve
- Negligible atmospheric contamination
- Excellent physical and chemical resistance
- Resistant to acids, alkalis, solvents and lubricants, cosmetics, household products and detergents
PREPARATION:
The paint must be mixed well before use.
APPLICATION:
Some plastics may be impregnated with lubricants or anti-static additives which may impair the adhesion of the paint.
CURING:
It is important that the printed ink layer has time to fully cure to ensure that full chemical and mechanical resistance is achieved.
The resistance of prints immediately after curing is excellent, but for best results it is recommended to wait 6h after curing to achieve optimum resistance.
The impact resistance of some PVC and PETG containers may deteriorate after printing. It can take up to 12 weeks to achieve full resistance.
SPECIAL INSTRUCTIONS:
- Always check the printing properties before production.
- Insufficient curing of the varnish can result in poor adhesion, lower abrasion resistance, reduced durability and stronger odour.
- Excessive drying of the ink can reduce the flexibility of the printed part and the adhesion of subsequent layers of ink.
- Keep the ink away from an external light source, which may cause an undesirable reaction of the formation of a "peel" on the paint surface.
Safety data sheet:
Available on request
HEALTH AND SAFETY INFORMATION:
Users are advised to wear gloves and protective cream to prevent direct skin contact. Safety glasses are recommended in areas where paint may be splashed.
If the product comes into contact with your skin, wipe it off with a clean, dry cloth (do not use solvents). Wash the affected area with soap and water. Refer to the relevant safety data sheet (SDS) for further instructions and warnings.
Always keep paints and cleaning solutions away from heat sources, sparks and flames. If stored or transported at other temperatures, the ink should reach room temperature before printing. This may adversely affect performance and will affect any warranty provided by AFFORD Industrial.
95.000
3 Items
Specific References