Polski
From
0,99 PLN
netto
From Price PLN1.22 brutto
From Price PLN1.22 brutto
Rack rubbers cut to centimetres. 1 piece stands for 1 cm of rubber
A two-component solvent-based ink with a glossy finish, which is used for printing on the most difficult substrates.
SERIES 25.000 AffordGlass
25.000
3 Items
A two-component solvent-based ink with a glossy finish, which is used for printing on the most difficult substrates.
134,64 PLN Netto
PLN165.61
VAT included
Najniższa cena w ciągu ostatnich 30 dni
Cena całkowita(netto): 134,64 PLN
Cena całkowita(brutto): PLN165.61
Cena całkowita(brutto): PLN165.61
RANGE OF APPLICATIONS
Ink designed for printing on treated polyethylene and polypropylene and a wide range of difficult materials, i.e.: glass, metal, ceramics, polyamide
PRINTING PROCESS:
Grid:
- 90-140 wł/cm
Emulsion:
- 11.170 Photopolymer
- 11.701 Diazo
Curing:
No viscosity after about 0.5-3h at room temperature, full cure after 7 days or after 15 minutes at 100°C
Thinner:
- D-100 Fast Thinner
- D-400 Standard Thinner
Retarder:
- D-700 Retarder Hardener
- 29.118 Hardener 10-15%
- 29.119 Glass Hardener 10-15% - for printing on glass
Cleaning:
- Screen Cleaner 52.001
Storage:
- If Series 25 products are stored in their original packaging, at a temperature of 10-25°C with 30-70% humidity, they have a minimum lifespan of 2 years
GENERAL CHARACTERISTICS:
- Wide range of adhesion
- High gloss
- Good opacity
- Excellent heat resistance
- Suitable for glass, metal, ceramic and polyamide surfaces
- Good flexibility
- Good mechanical and chemical resistance - prints resistant to acids, alkalis, solvents, greases, household products and detergents
PREPARATION:
Before use, the paint must be mixed well with a hardener to increase the adhesion of the paint to difficult substrates and, if necessary, diluted as required.
TECHNICAL CHARACTERISTICS:
Series 25 has resistance to outdoor conditions (weather conditions, sunlight). These data depend on the type of substrate, altitude, geographical location and air pollution.
Safety data sheet: Available on request
HEALTH AND SAFETY INFORMATION:
Users are advised to wear gloves and protective cream to prevent direct skin contact. Safety glasses are recommended in areas where paint may be splashed. If the product comes into contact with the skin, wipe it off with a clean, dry cloth (do not use solvents). Wash the affected area with soap and water. Refer to the relevant safety data sheet (SDS) for further instructions and warnings. Always keep paints and cleaning solutions away from heat sources, sparks and flames. If stored or transported at other temperatures, the ink should reach room temperature before printing. This may adversely affect performance and will affect any warranty provided by AFFORD Industrial.
25.000
3 Items
Data sheet
- Finishing
- glossy
Specific References
You might also like
